NORYL GTX™ Resin GTX3210

NORYL GTX3210 is an unreinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V0 at 1.5mm. NORYL GTX3210 has high heat resistance, low density (1.12g/cm3) and excellent chemical　resistance. GTX3210 is suitable for the applications of industrial, electric and mobility components.

Product Family

NORYL™ RESINS

Polymer Family

Polyphenylene Ether + PA (PPE+Nylon)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Chemical Resistance
Flame Retardant
High Flow
Low Specific Gravity

Industry

Material previously used in

Electrical
Electronic Components
Wireless Communication

Applications

Possible usage of material

Automotive
Electrical Components & Infrastructure
Electronic Components

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Surface Resistivity	1.7E15	Ω/sq	ASTM D257
Volume Resistivity	1.0E15	Ω.cm	ASTM D257

FLAME CHARACTERISTICS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
UL Yellow Card Link	View	-	-
UL Recognized, 94V-0 Flame Class Rating	1.5	mm	UL 94

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	74	J/m	ASTM D256
Izod Impact, notched, -30°C	49	J/m	ASTM D256
Izod Impact, unnotched, 23°C	2160	J/m	ASTM D4812
Izod Impact, unnotched, -30°C	955	J/m	ASTM D4812
*Izod Impact, notched 80104 +23°C*	8.2	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 -30°C*	5.3	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	135	kJ/m²	ISO 180/1U
*Izod Impact, unnotched 80104 -30°C*	84	kJ/m²	ISO 180/1U

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	100 - 120	°C
Drying Time	3 - 5	Hrs
Melt Temperature	260 - 320	°C
Nozzle Temperature	250 - 320	°C
Front - Zone 3 Temperature	260 - 320	°C
Middle - Zone 2 Temperature	260 - 320	°C
Rear - Zone 1 Temperature	260 - 320	°C
Mold Temperature	75 - 150	°C
Back Pressure	0.2 - 1.6	MPa
Screw Speed	20 - 100	rpm

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, brk, Type I, 5 mm/min	39	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	18	%	ASTM D638
Tensile Modulus, 5 mm/min	2344	MPa	ASTM D638
Flexural Strength, 1.3 mm/min, 50 mm span	74	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	2130	MPa	ASTM D790
Tensile Stress, break, 5 mm/min	40	MPa	ISO 527
Tensile Strain, break, 5 mm/min	20	%	ISO 527
Tensile Modulus, 1 mm/min	2354	MPa	ISO 527
Flexural Strength, 2 mm/min	77	MPa	ISO 178
Flexural Modulus, 2 mm/min	2318	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	1.12	-	ASTM D792
Density	1.12	g/cm³	ISO 1183
Melt Flow Rate, 300°C/5.0 kgf	45	g/10 min	ASTM D1238
Melt Volume Rate, MVR at 300°C/5.0 kg	41	cm³/10 min	ISO 1133
Water Absorption, (23°C/24hrs)	0.73	%	ISO 62-1
Mold Shrinkage, flow	1.12	%	SABIC method
Mold Shrinkage, xflow	1.07	%	SABIC method

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 0.45 MPa, 3.2 mm, unannealed	195	°C	ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed	140	°C	ASTM D648
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	187	°C	ISO 75/Bf
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	110	°C	ISO 75/Af
CTE, -40°C to 40°C, flow	8.7E-5	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	8.7E-5	1/°C	ASTM E831
CTE, -40°C to 40°C, flow	8.7E-5	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	8.5E-5	1/°C	ISO 11359-2
Relative Temp Index, Elec	65	°C	UL 746B
Relative Temp Index, Mech w/impact	65	°C	UL 746B
Relative Temp Index, Mech w/o impact	65	°C	UL 746B

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES