IMPACT
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched, 23°C | 843 | J/m | ASTM D256 |
NORYL GTX6011 resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high heat resistance and excellent chemical resistance. NORYL GTX6011 resin may be an excellent candidate for Automotive exterior and industrial applications.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched, 23°C | 843 | J/m | ASTM D256 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 140 | °C | |
Drying Time | 3 - 4 | Hrs | |
Melt Temperature | 280 - 310 | °C | |
Nozzle Temperature | 280 - 310 | °C | |
Front - Zone 3 Temperature | 280 - 310 | °C | |
Middle - Zone 2 Temperature | 270 - 290 | °C | |
Rear - Zone 1 Temperature | 260 - 280 | °C | |
Mold Temperature | 80 - 120 | °C | |
Screw Speed | 30 - 80 | rpm | |
Back Pressure | 0.5 - 1.5 | MPa |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yield | 45 | MPa | SABIC - Japan Method |
Tensile Strain, break | 150 | % | SABIC - Japan Method |
Flexural Stress | 74 | MPa | ASTM D790 |
Flexural Modulus | 1860 | MPa | ASTM D790 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Specific Gravity | 1.07 | - | ASTM D792 |
Water Absorption, (23°C/24hrs) | 0.6 | % | ASTM D570 |
Mold Shrinkage, flow, 3.2 mm | 1.1 - 1.3 | % | SABIC method |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 0.45 MPa, 3.2 mm, unannealed | 180 | °C | ASTM D648 |
CTE, -30°C to 30°C | 0.00008 - 0.0001 | 1/°C | TMA |
Your PDF is downloading. Please wait.