IMPACT
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched 80*10*4 +23°C | 7 | kJ/m² | ISO 180/1A |
Izod Impact, notched 80*10*4 -30°C | 6 | kJ/m² | ISO 180/1A |
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 8 | kJ/m² | ISO 179/1eA |
NORYL GTX8120P resin is a 20% glass fiber reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This extrudable grade has excellent chemical resistance and high heat resistance. . NORYL GTX8120P resin is anodizable, has low thermal conductivity and is an excellent candidate for extruded thermal break applications.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched 80*10*4 +23°C | 7 | kJ/m² | ISO 180/1A |
Izod Impact, notched 80*10*4 -30°C | 6 | kJ/m² | ISO 180/1A |
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 8 | kJ/m² | ISO 179/1eA |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yield, 5 mm/min | 125 | MPa | ISO 527 |
Tensile Stress, break, 5 mm/min | 125 | MPa | ISO 527 |
Tensile Strain, yield, 5 mm/min | 3 | % | ISO 527 |
Tensile Strain, break, 5 mm/min | 3.5 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 6800 | MPa | ISO 527 |
Flexural Stress, yield, 2 mm/min | 175 | MPa | ISO 178 |
Flexural Modulus, 2 mm/min | 5000 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Density | 1.24 | g/cm³ | ISO 1183 |
Water Absorption, (23°C/saturated) | 2.5 | % | ISO 62-1 |
Moisture Absorption (23°C / 50% RH) | 1 | % | ISO 62 |
Melt Volume Rate, MVR at 280°C/10.0 kg | 12 | cm³/10 min | ISO 1133 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 110 - 120 | °C | |
Drying Time | 2 - 4 | Hrs | |
Melt Temperature | 270 - 280 | °C | |
Calibrator Temperature | 20 - 100 | °C |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
CTE, 23°C to 60°C, flow | 3.5E-05 | 1/°C | ISO 11359-2 |
CTE, 23°C to 60°C, xflow | 7.5E-05 | 1/°C | ISO 11359-2 |
Vicat Softening Temp, Rate B/50 | 235 | °C | ISO 306 |
Vicat Softening Temp, Rate B/120 | 235 | °C | ISO 306 |
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 240 | °C | ISO 75/Bf |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched 80*10*4 +23°C | 7 | kJ/m² | ISO 180/1A |
Izod Impact, notched 80*10*4 -30°C | 6 | kJ/m² | ISO 180/1A |
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 8 | kJ/m² | ISO 179/1eA |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yield, 5 mm/min | 125 | MPa | ISO 527 |
Tensile Stress, break, 5 mm/min | 125 | MPa | ISO 527 |
Tensile Strain, yield, 5 mm/min | 3 | % | ISO 527 |
Tensile Strain, break, 5 mm/min | 3.5 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 6800 | MPa | ISO 527 |
Flexural Stress, yield, 2 mm/min | 175 | MPa | ISO 178 |
Flexural Modulus, 2 mm/min | 5000 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Density | 1.24 | g/cm³ | ISO 1183 |
Water Absorption, (23°C/saturated) | 2.5 | % | ISO 62-1 |
Moisture Absorption (23°C / 50% RH) | 1 | % | ISO 62 |
Melt Volume Rate, MVR at 280°C/10.0 kg | 12 | cm³/10 min | ISO 1133 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 110 - 120 | °C | |
Drying Time | 2 - 4 | Hrs | |
Melt Temperature | 270 - 280 | °C | |
Calibrator Temperature | 20 - 100 | °C |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
CTE, 23°C to 60°C, flow | 3.5E-05 | 1/°C | ISO 11359-2 |
CTE, 23°C to 60°C, xflow | 7.5E-05 | 1/°C | ISO 11359-2 |
Vicat Softening Temp, Rate B/50 | 235 | °C | ISO 306 |
Vicat Softening Temp, Rate B/120 | 235 | °C | ISO 306 |
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 240 | °C | ISO 75/Bf |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched 80*10*4 +23°C | 7 | kJ/m² | ISO 180/1A |
Izod Impact, notched 80*10*4 -30°C | 6 | kJ/m² | ISO 180/1A |
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 8 | kJ/m² | ISO 179/1eA |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yield, 5 mm/min | 125 | MPa | ISO 527 |
Tensile Stress, break, 5 mm/min | 125 | MPa | ISO 527 |
Tensile Strain, yield, 5 mm/min | 3 | % | ISO 527 |
Tensile Strain, break, 5 mm/min | 3.5 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 6800 | MPa | ISO 527 |
Flexural Stress, yield, 2 mm/min | 175 | MPa | ISO 178 |
Flexural Modulus, 2 mm/min | 5000 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Density | 1.24 | g/cm³ | ISO 1183 |
Water Absorption, (23°C/saturated) | 2.5 | % | ISO 62-1 |
Moisture Absorption (23°C / 50% RH) | 1 | % | ISO 62 |
Melt Volume Rate, MVR at 280°C/10.0 kg | 12 | cm³/10 min | ISO 1133 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 110 - 120 | °C | |
Drying Time | 2 - 4 | Hrs | |
Melt Temperature | 270 - 280 | °C | |
Calibrator Temperature | 20 - 100 | °C |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
CTE, 23°C to 60°C, flow | 3.5E-05 | 1/°C | ISO 11359-2 |
CTE, 23°C to 60°C, xflow | 7.5E-05 | 1/°C | ISO 11359-2 |
Vicat Softening Temp, Rate B/50 | 235 | °C | ISO 306 |
Vicat Softening Temp, Rate B/120 | 235 | °C | ISO 306 |
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 240 | °C | ISO 75/Bf |
Your PDF is downloading. Please wait.