NORYL GTX™ Resin GTX840

NORYL GTX840 resin is a 40% glass fiber reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade has high stiffness (flexural modulus 11860 MPa), excellent chemical resistance, and high heat resistance. NORYL GTX GTX840 resin is an excellent candidate for a wide variety of applications including automotive under-the-hood and water management.

Product Family

NORYL™ RESINS

Polymer Family

Polyphenylene Ether + PA (PPE+Nylon)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Chemical Resistance
Dimensional stability
High stiffness/Strength
High temperature resistance
Hydrolytic Stability
Low Moisture Absorption
Low Specific Gravity
Low Warpage
No PFAS intentionally added

Industry

Material previously used in

Automotive EV
Automotive Under the Hood
Electrical
Electronic Components
Water Management

Applications

Possible usage of material

Electronic Components
EV Infrastructure
Personal Computing
Transmission/Transfer Comp

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*Izod Impact, notched 80104 +23°C*	11	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 -30°C*	11	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	70	kJ/m²	ISO 180/1U
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	11	kJ/m²	ISO 179/1eA
*Charpy 23°C, Unnotch Edgew 80104 sp=62mm*	72	kJ/m²	ISO 179/1eU
Izod Impact, notched, 23°C	114	J/m	ASTM D256
Izod Impact, notched, -30°C	90	J/m	ASTM D256
Izod Impact, unnotched, 23°C	1040	J/m	ASTM D4812

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	95 - 105	°C
Drying Time	3 - 4	Hrs
Drying Time (Cumulative)	8	Hrs
Maximum Moisture Content	0.07	%
Minimum Moisture Content	0.02	%
Melt Temperature	295 - 315	°C
Nozzle Temperature	295 - 315	°C
Front - Zone 3 Temperature	290 - 315	°C
Middle - Zone 2 Temperature	280 - 315	°C
Rear - Zone 1 Temperature	275 - 315	°C
Mold Temperature	75 - 120	°C
Back Pressure	0.3 - 1.4	MPa
Screw Speed	20 - 100	rpm
Shot to Cylinder Size	30 - 50	%
Vent Depth	0.013 - 0.038	mm

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Modulus, 1 mm/min	12570	MPa	ISO 527
Tensile Stress, break, 5 mm/min	200	MPa	ISO 527
Tensile Strain, break, 5 mm/min	2.4	%	ISO 527
Flexural Modulus, 2 mm/min	11730	MPa	ISO 178
Flexural Stress, break, 2 mm/min	306	MPa	ISO 178
Tensile Modulus, 5 mm/min	13020	MPa	ASTM D638
Tensile Stress, brk, Type I, 5 mm/min	201	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	2.2	%	ASTM D638
Flexural Modulus, 1.3 mm/min, 50 mm span	11800	MPa	ASTM D790
Flexural Stress, brk, 1.3 mm/min, 50 mm span	290	MPa	ASTM D790
Hardness, Rockwell R	108	-	ASTM D785

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.45	g/cm³	ISO 1183
Moisture Absorption, (23°C/50% RH/24hrs)	0.13	%	ISO 62-4
Moisture Absorption, (23°C/50% RH/Equilibrium)	0.38	%	ISO 62-4
Water Absorption, (23°C/24hrs)	0.63	%	ISO 62-1
Water Absorption, (23°C/saturated)	1.64	%	ISO 62-1
Mold Shrinkage, flow, 24 hrs	0.17	%	ISO 294
Mold Shrinkage, xflow, 24 hrs	0.99	%	ISO 294
Melt Volume Rate, MVR at 220°C/5.0 kg	13	cm³/10 min	ISO 1133
Specific Gravity	1.45	-	ASTM D792
Water Absorption, (23°C/Saturated)	1.64	%	ASTM D570
Water Absorption, (23°C/24hrs)	0.63	%	ASTM D570
Melt Flow Rate, 280°C/5.0 kgf	15	g/10 min	ASTM D1238
Mold Shrinkage, flow, 24 hrs	0.17	%	ASTM D955
Mold Shrinkage, xflow, 24 hrs	0.99	%	ASTM D955
Mold Shrinkage, flow, 3.2 mm	0.24 - 0.27	%	SABIC method
Mold Shrinkage, xflow, 3.2 mm	0.6 - 0.63	%	SABIC method

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	259	°C	ISO 75/Bf
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	244	°C	ISO 75/Af
Vicat Softening Temp, Rate A/50	257	°C	ISO 306
Vicat Softening Temp, Rate B/50	248	°C	ISO 306
CTE, 23°C to 60°C, flow	1.7E-05	1/°C	ISO 11359-2
CTE, 23°C to 60°C, xflow	7.0E-05	1/°C	ISO 11359-2
HDT, 0.45 MPa, 6.4 mm, unannealed	259	°C	ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed	245	°C	ASTM D648
Vicat Softening Temp, Rate B/50	247	°C	ASTM D1525
CTE, 23°C to 60°C, flow	1.7E-05	1/°C	ASTM E831
CTE, 23°C to 60°C, xflow	7.0E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, flow	1.6E-05 - 2.0E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	9.0E-05 - 9.4E-05	1/°C	ASTM E831

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	94	J/m	ASTM D256
Izod Impact, notched, -30°C	90	J/m	ASTM D256
*Izod Impact, notched 80104 +23°C*	11	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 -30°C*	11	kJ/m²	ISO 180/1A
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	11	kJ/m²	ISO 179/1eA
Charpy Impact, notched, -30°C	11	kJ/m²	ISO 179/2C

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	95 - 105	°C
Drying Time	3 - 4	Hrs
Drying Time (Cumulative)	8	Hrs
Maximum Moisture Content	0.07	%
Minimum Moisture Content	0.02	%
Melt Temperature	295 - 315	°C
Nozzle Temperature	295 - 315	°C
Front - Zone 3 Temperature	290 - 315	°C
Middle - Zone 2 Temperature	280 - 315	°C
Rear - Zone 1 Temperature	275 - 315	°C
Mold Temperature	75 - 120	°C
Back Pressure	0.3 - 1.4	MPa
Screw Speed	20 - 100	rpm
Shot to Cylinder Size	30 - 50	%
Vent Depth	0.013 - 0.038	mm

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, brk, Type I, 5 mm/min	178	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	2	%	ASTM D638
Tensile Modulus, 5 mm/min	13520	MPa	ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	249	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	11860	MPa	ASTM D790
Hardness, Rockwell R	108	-	ASTM D785
Tensile Stress, break, 5 mm/min	198	MPa	ISO 527
Tensile Strain, break, 5 mm/min	2	%	ISO 527
Tensile Modulus, 1 mm/min	13940	MPa	ISO 527
Flexural Stress, yield, 2 mm/min	280	MPa	ISO 178
Flexural Modulus, 2 mm/min	12270	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	1.45	-	ASTM D792
Water Absorption, (23°C/Saturated)	0.3	%	ASTM D570
Mold Shrinkage, flow, 3.2 mm	0.24 - 0.27	%	SABIC method
Mold Shrinkage, xflow, 3.2 mm	0.6 - 0.63	%	SABIC method
Density	1.45	g/cm³	ISO 1183
Moisture Absorption (23°C / 50% RH)	0.1	%	ISO 62
Melt Volume Rate, MVR at 220°C/5.0 kg	10	cm³/10 min	ISO 1133

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 0.45 MPa, 6.4 mm, unannealed	260	°C	ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed	247	°C	ASTM D648
CTE, -40°C to 40°C, flow	0.000016 - 0.0000196	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	0.00009 - 0.0000937	1/°C	ASTM E831
Vicat Softening Temp, Rate B/50	246	°C	ISO 306
Vicat Softening Temp, Rate B/120	246	°C	ISO 306
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	258	°C	ISO 75/Bf
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	244	°C	ISO 75/Af

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	94	J/m	ASTM D256
Izod Impact, notched, -30°C	90	J/m	ASTM D256
*Izod Impact, notched 80104 +23°C*	11	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 -30°C*	11	kJ/m²	ISO 180/1A
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	11	kJ/m²	ISO 179/1eA
Charpy Impact, notched, -30°C	11	kJ/m²	ISO 179/2C

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	95 - 105	°C
Drying Time	3 - 4	Hrs
Drying Time (Cumulative)	8	Hrs
Maximum Moisture Content	0.07	%
Minimum Moisture Content	0.02	%
Melt Temperature	295 - 315	°C
Nozzle Temperature	295 - 315	°C
Front - Zone 3 Temperature	290 - 315	°C
Middle - Zone 2 Temperature	280 - 315	°C
Rear - Zone 1 Temperature	275 - 315	°C
Mold Temperature	75 - 120	°C
Back Pressure	0.3 - 1.4	MPa
Screw Speed	20 - 100	rpm
Shot to Cylinder Size	30 - 50	%
Vent Depth	0.013 - 0.038	mm

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, brk, Type I, 5 mm/min	178	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	2	%	ASTM D638
Tensile Modulus, 5 mm/min	13520	MPa	ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	249	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	11860	MPa	ASTM D790
Hardness, Rockwell R	108	-	ASTM D785
Tensile Stress, break, 5 mm/min	198	MPa	ISO 527
Tensile Strain, break, 5 mm/min	2	%	ISO 527
Tensile Modulus, 1 mm/min	13940	MPa	ISO 527
Flexural Stress, yield, 2 mm/min	280	MPa	ISO 178
Flexural Modulus, 2 mm/min	12270	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	1.45	-	ASTM D792
Water Absorption, (23°C/Saturated)	0.3	%	ASTM D570
Mold Shrinkage, flow, 3.2 mm	0.24 - 0.27	%	SABIC method
Mold Shrinkage, xflow, 3.2 mm	0.6 - 0.63	%	SABIC method
Density	1.45	g/cm³	ISO 1183
Moisture Absorption (23°C / 50% RH)	0.1	%	ISO 62
Melt Volume Rate, MVR at 220°C/5.0 kg	10	cm³/10 min	ISO 1133

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 0.45 MPa, 6.4 mm, unannealed	260	°C	ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed	247	°C	ASTM D648
CTE, -40°C to 40°C, flow	0.000016 - 0.0000196	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	0.00009 - 0.0000937	1/°C	ASTM E831
Vicat Softening Temp, Rate B/50	246	°C	ISO 306
Vicat Softening Temp, Rate B/120	246	°C	ISO 306
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	258	°C	ISO 75/Bf
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	244	°C	ISO 75/Af

THIS SITE USES COOKIES

NORYL GTX™ Resin GTX840

Product Family

Polymer Family

Processing Technology

Where to buy

Colors

Features

Industry

Applications

Technical Datasheet Data

IMPACT

INJECTION MOLDING

MECHANICAL

PHYSICAL

THERMAL

IMPACT

INJECTION MOLDING

MECHANICAL

PHYSICAL

THERMAL

IMPACT

INJECTION MOLDING

MECHANICAL

PHYSICAL

THERMAL

Curve Data

CAE Cards

Register for High value Multi-Point Data

THIS SITE USES COOKIES

NORYL GTX™ Resin GTX840

Product Family

Polymer Family

Processing Technology

Where to buy

Colors

Features

Industry

Applications

Technical Datasheet Data

IMPACT

INJECTION MOLDING

MECHANICAL

PHYSICAL

THERMAL

IMPACT

INJECTION MOLDING

MECHANICAL

PHYSICAL

THERMAL

IMPACT

INJECTION MOLDING

MECHANICAL

PHYSICAL

THERMAL

Curve Data

CAE Cards

Related Documents

Technical Data Sheets

Register for High value Multi-Point Data