NORYL™ PPE Powders + Concentrates 6470C

Noryl 6470C is a compounded polyphenylene ether resin concentrate containing polystyrene; this grade is intended for use as an additive or a building block in a variety of thermoplastics such as XPS foams where it enables meeting challenging requirements on thermal, flame & mechanical performance. Noryl 6470C resin can be used for packaging applications and to improve properties like Heat Distortion, and Creep Resistance for polyolefins such as PP, PE and thermoplastic elastomers like Styrenic Block Copolymers.

Product Family

NORYL™ RESINS

Polymer Family

Polyphenylene Ether + PS (PPE+PS)

Processing Technology

Injection Molding
Extrusion
Thermoforming

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Amorphous
Foamable
Good dimensional stability
Good Stiffness
High Heat Resistance
High Strength
Hydrolytic Stability
Low Creep Sensitivity
Low Shrinkage
No PFAS intentionally added
Thermally conductive/Electrically isolative

Industry

Material previously used in

Energy Storage

Applications

Possible usage of material

Additive Plastic
Auto Electrical
Battery Cell
Building Element
Building/Construction Sheet
EV/HEV Battery
Infrastructure
structural foam

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

EXTRUSION

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Drying Temperature	90 - 100	°C
Drying Time	2 - 3	Hrs

FIRST EXTRUDER

PROPERTIES	TYPICAL VALUES	UNITS
Hopper Temperature	40 - 50	°C
Barrel Temperature	140 - 290	°C
Melt Temperature	200 - 250	°C

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*Izod Impact, notched 80104 +23°C*	3	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 -30°C*	3	kJ/m²	ISO 180/1A
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	2	kJ/m²	ISO 179/1eA
*Charpy -30°C, V-notch Edgew 80104 sp=62mm*	2	kJ/m²	ISO 179/1eA

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	80 - 100	°C
Drying Time	2 - 4	Hrs
Melt Temperature	310 - 320	°C
Nozzle Temperature	300 - 320	°C
Front - Zone 3 Temperature	310 - 320	°C
Middle - Zone 2 Temperature	300 - 320	°C
Rear - Zone 1 Temperature	280 - 300	°C
Hopper Temperature	40 - 60	°C
Mold Temperature	80 - 110	°C

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, yield, 50 mm/min	87	MPa	ISO 527
Tensile Stress, break, 50 mm/min	74	MPa	ISO 527
Tensile Strain, yield, 50 mm/min	6	%	ISO 527
Tensile Strain, break, 50 mm/min	6	%	ISO 527
Tensile Modulus, 1 mm/min	2900	MPa	ISO 527
Flexural Stress, yield, 2 mm/min	122	MPa	ISO 178
Flexural Modulus, 2 mm/min	2900	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.07	g/cm³	ISO 1183
Water Absorption, (23°C/saturated)	0.25	%	ISO 62-1
Moisture Absorption (23°C / 50% RH)	0.06	%	ISO 62
Melt Volume Rate, MVR at 280°C/10.0 kg	16	cm³/10 min	ISO 1133
Matrix Tg	166	°C	DMA

SECOND EXTRUDER

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Barrel Temperature	80 - 200	°C

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
CTE, -40°C to 40°C, flow	7.E-05	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	7.E-05	1/°C	ISO 11359-2
Vicat Softening Temp, Rate B/120	166	°C	ISO 306
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	143	°C	ISO 75/Af
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	158	°C	ISO 75/Bf

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES