NORYL™ PPE Powders + Concentrates FR6460C

NORYL Resin FR6460C is a compounded Halogen free flame retarded polyphenylene ether resin containing polystyrene; this grade is intended for use as an additive or a building block in a variety of thermoplastic application such as XPS foams where it enables meeting challenging requirements on thermal, flame and mechanical performance. Noryl FR6460C resin can be used to improve properties like Heat Distortion, and Creep Resistance and Flammability of Polyolefins such as PP and PE.

Product Family

NORYL™ RESINS

Polymer Family

Polyphenylene Ether + PS (PPE+PS)

Processing Technology

Injection Molding
Extrusion

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Amorphous
Flame Retardant
Foamable
Good dimensional stability
Good Stiffness
High Heat Resistance
High Strength
Hydrolytic Stability
Low Creep Sensitivity
Low Shrinkage
No PFAS intentionally added
Non-Brominated
Non-Chlorinated
Non-Halogenated
Thermally conductive/Electrically isolative

Industry

Material previously used in

Energy Storage

Applications

Possible usage of material

Additive Plastic
Auto Electrical
Battery Cell
Building Element
Building/Construction Sheet
EV/HEV Battery
Infrastructure

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

EXTRUSION

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Drying Temperature	90 - 100	°C
Drying Time	2 - 3	Hrs

FIRST EXTRUDER

PROPERTIES	TYPICAL VALUES	UNITS
Hopper Temperature	40 - 50	°C
Barrel Temperature	140 - 290	°C
Melt Temperature	200 - 250	°C

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*Izod Impact, notched 80104 +23°C*	4	kJ/m²	ISO 180/1A

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	80 - 100	°C
Drying Time	2 - 4	Hrs
Melt Temperature	315 - 325	°C
Rear - Zone 1 Temperature	280 - 300	°C
Middle - Zone 2 Temperature	290 - 310	°C
Front - Zone 3 Temperature	315 - 325	°C
Nozzle Temperature	300 - 320	°C
Mold Temperature	100 - 120	°C

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Modulus, 1 mm/min	2700	MPa	ISO 527
Tensile Stress, yield, 50 mm/min	76	MPa	ISO 527
Tensile Stress, break, 50 mm/min	76	MPa	ISO 527
Tensile Strain, break, 50 mm/min	3	%	ISO 527
Flexural Modulus, 2 mm/min	2700	MPa	ISO 178
Flexural Stress, yield, 2 mm/min	122	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.07	g/cm³	ISO 1183
Melt Volume Rate, MVR at 280°C/2.16 kg	13	cm³/10 min	ISO 1133
Matrix Tg	125	°C	DMA
Moisture Absorption, (23°C/50% RH/24hrs)	0.06	%	ISO 62-4
Water Absorption, (23°C/saturated)	0.25	%	ISO 62-1

SECOND EXTRUDER

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Barrel Temperature	80 - 200	°C

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	100	°C	ISO 75/Af
Vicat Softening Temp, Rate B/120	125	°C	ISO 306

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES