NORYL™ Resin EX130

NORYL EX130 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection molding grade exhibits a good balance of impact resistance and surface aesthetics. NORYL EX130 resin, with its low warpage and dimensional stability, is an excellent candidate for automotive exterior applications.

Product Family

NORYL™ RESINS

Polymer Family

Polyphenylene Ether + PS (PPE+PS)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Asia

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Amorphous
Dimensional stability
Hydrolytic Stability
Low Moisture Absorption
Low Shrinkage
Low Specific Gravity
Low Warpage
No PFAS intentionally added

Industry

Material previously used in

Automotive Exteriors
Automotive Lighting
Lighting

Applications

Possible usage of material

Air Cabin Interiors
Auto Aftermarket
Non-LED Lighting
Seating/Chair
Wheel Cover

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	235	J/m	ASTM D256

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	80 - 90	°C
Drying Time	2 - 4	Hrs
Melt Temperature	275 - 310	°C
Nozzle Temperature	270 - 305	°C
Front - Zone 3 Temperature	270 - 310	°C
Middle - Zone 2 Temperature	265 - 300	°C
Rear - Zone 1 Temperature	245 - 290	°C
Mold Temperature	70 - 110	°C
Screw Speed	40 - 60	rpm
Back Pressure	0.5 - 1.4	MPa

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, yield	53	MPa	SABIC - Japan Method
Tensile Strain, break	50	%	SABIC - Japan Method
Flexural Stress	78	MPa	ASTM D790
Flexural Modulus	2160	MPa	ASTM D790

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Melt Flow Rate, 250°C/10.0 kgf	4.6	g/10 min	ASTM D1238
Specific Gravity	1.06	-	ASTM D792
Water Absorption, (23°C/24hrs)	0.06	%	ASTM D570
Mold Shrinkage, flow, 3.2 mm	0.5 - 0.7	%	SABIC method

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 1.82 MPa, 6.4 mm, unannealed	127	°C	ASTM D648
CTE, -30°C to 30°C	5.50E-05 - 7.50E-05	1/°C	TMA

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES