NORYL™ Resin FN150E

NORYL™ FN150E resin is a twin-wall foamable blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS) and offers 20% weight reduction at 6.35mm (0.250”) wall. This material contains non-brominated, non-chlorinated flame retardant with a UL94 flame rating of 5VA and V0 at 4mm and has thin-wall impact resistance capability. NORYL FN150E resin exhibits good dimensional stability, low moisture absorption, and improved reliability + productivity. The unique combination of properties allow for designing optimum wall thickness in computer and business machine applications, electrical enclosures/housings, medical equipment, and hospital bed rails and components. In addition, the twin-wall foam offers structural foam at optimal cost efficiency.

Product Family

NORYL™ RESINS

Polymer Family

Polyphenylene Ether + PS (PPE+PS)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Europe

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Flame Retardant
Good Stiffness
Hydrolytic Stability
Low Creep Sensitivity
Low Warpage
Non-Brominated
Non-Chlorinated
Non-Halogenated
Structural
Thin Wall

Industry

Material previously used in

Patient Testing
Water Management

Applications

Possible usage of material

Audio
Displays
Enclosure/Housing/Cover
Energy Management
Lab Ware and Clinical Diagnostics
Medical Device
Meter Gas
Monitoring and Imaging
Renal and Blood Handling
Wiring Devices

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

FLAME CHARACTERISTICS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
UL Yellow Card Link	-	-	-
UL Recognized, 94-5VA Flame Class Rating	-	mm	UL 94
UL Recognized, 94V-0 Flame Class Rating	-	mm	UL 94

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	-	J/m	ASTM D256

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, yield	-	MPa	SABIC - Japan Method
Tensile Strain, break	-	%	SABIC - Japan Method
Flexural Stress	-	MPa	ASTM D790
Flexural Modulus	-	MPa	ASTM D790

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	-	-	ASTM D792
Water Absorption, (23°C/24hrs)	-	%	ASTM D570
Mold Shrinkage, flow, 3.2 mm	-	%	SABIC method

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 0.45 MPa, 3.2 mm, unannealed	-	°C	ASTM D648
CTE, -30°C to 30°C	-	1/°C	TMA
Relative Temp Index, Elec	-	°C	UL 746B
Relative Temp Index, Mech w/impact	-	°C	UL 746B
Relative Temp Index, Mech w/o impact	-	°C	UL 746B

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Relative Permittivity, 1 MHz	2.2	-	IEC 60250
Dissipation Factor, 50/60 Hz	0.0047	-	IEC 60250
Dissipation Factor, 1 MHz	0.0039	-	IEC 60250
Relative Permittivity, 50/60 Hz	2.3	-	IEC 60250

FLAME CHARACTERISTICS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
UL Yellow Card Link	View	-	-
UL Recognized, 94-5VA Flame Class Rating	4	mm	UL 94
UL Recognized, 94V-0 Flame Class Rating	4	mm	UL 94
Oxygen Index (LOI)	29	%	ISO 4589

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Gardner Impact (GE)	10 - 20	J	SABIC method
*Izod Impact, notched 80104 +23°C*	15	kJ/m²	ISO 180/1A

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	80 - 100	°C
Drying Time	2 - 3	Hrs
Melt Temperature	260 - 280	°C
Nozzle Temperature	240 - 260	°C
Front - Zone 3 Temperature	260 - 280	°C
Middle - Zone 2 Temperature	240 - 260	°C
Rear - Zone 1 Temperature	220 - 240	°C
Hopper Temperature	60 - 80	°C
Mold Temperature	60 - 80	°C

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, yield, 50 mm/min	45	MPa	ISO 527
Tensile Stress, break, 50 mm/min	40	MPa	ISO 527
Tensile Strain, yield, 50 mm/min	3	%	ISO 527
Tensile Strain, break, 50 mm/min	40	%	ISO 527
Flexural Stress, yield, 2 mm/min	70	MPa	ISO 178
Flexural Modulus, 2 mm/min	2000	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	1.1	-	ASTM D792
Weight Reduction	20	%	SABIC method
Mold Shrinkage on Tensile Bar, flow	0.6 - 0.8	%	SABIC method
Melt Volume Rate, MVR at 280°C/2.16 kg	6	cm³/10 min	ISO 1133

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Thermal Conductivity	0.24	W/m-°C	ISO 8302
CTE, 23°C to 80°C, flow	7.5E-05	1/°C	ISO 11359-2
CTE, 23°C to 80°C, xflow	8.5E-05	1/°C	ISO 11359-2
Vicat Softening Temp, Rate B/120	105	°C	ISO 306
Relative Temp Index, Elec	65	°C	UL 746B
Relative Temp Index, Mech w/impact	65	°C	UL 746B
Relative Temp Index, Mech w/o impact	65	°C	UL 746B

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES

NORYL™ Resin FN150E

Product Family

Polymer Family

Processing Technology

Where to buy

Colors

Features

Industry

Applications

Technical Datasheet Data

FLAME CHARACTERISTICS

IMPACT

MECHANICAL

PHYSICAL

THERMAL

ELECTRICAL

FLAME CHARACTERISTICS

IMPACT

INJECTION MOLDING

MECHANICAL

PHYSICAL

THERMAL

Related Documents

Register for High value Multi-Point Data