NORYL NF1520 is a compound based on PPE+PS resin containing 20% Glass Fiber and 15% PTFE. Added feature of this grade is Wear Resistance.
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| UL Yellow Card Link 2 | View | - | - |
| UL Recognized, 94HB Flame Class Rating | ≥1.5 | mm | UL 94 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Izod Impact, unnotched, 23°C | 357 | J/m | ASTM D4812 |
| Izod Impact, notched, 23°C | 74 | J/m | ASTM D256 |
| Instrumented Dart Impact Total Energy, 23°C | 16 | J | ASTM D3763 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 105 - 110 | °C | |
| Drying Time | 3 - 4 | Hrs | |
| Drying Time (Cumulative) | 8 | Hrs | |
| Maximum Moisture Content | 0.02 | % | |
| Melt Temperature | 275 - 305 | °C | |
| Nozzle Temperature | 275 - 305 | °C | |
| Front - Zone 3 Temperature | 265 - 305 | °C | |
| Middle - Zone 2 Temperature | 255 - 300 | °C | |
| Rear - Zone 1 Temperature | 245 - 295 | °C | |
| Mold Temperature | 70 - 100 | °C | |
| Back Pressure | 0.3 - 0.7 | MPa | |
| Screw Speed | 20 - 100 | rpm | |
| Shot to Cylinder Size | 30 - 70 | % | |
| Vent Depth | 0.038 - 0.051 | mm |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, yld, Type I, 5 mm/min | 74 | MPa | ASTM D638 |
| Tensile Stress, brk, Type I, 5 mm/min | 74 | MPa | ASTM D638 |
| Tensile Strain, brk, Type I, 5 mm/min | 4.2 | % | ASTM D638 |
| Flexural Stress, yld, 2.6 mm/min, 100 mm span | 101 | MPa | ASTM D790 |
| Flexural Modulus, 2.6 mm/min, 100 mm span | 5300 | MPa | ASTM D790 |
| K-factor xE-10, PV=2000 psi-fpm vs Steel | 73 | - | SABIC method |
| Coefficient of Friction on steel, Static | 0.3 | - | ASTM D1894 |
| Coefficient of Friction on steel,Kinetic | 0.46 | - | ASTM D1894 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Specific Gravity | 1.34 | - | ASTM D792 |
| Mold Shrinkage, flow, 3.2 mm | 0.15 - 0.25 | % | SABIC method |
| Mold Shrinkage, xflow, 3.2 mm | 0.25 - 0.45 | % | SABIC method |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT, 0.45 MPa, 3.2 mm, unannealed | 102 | °C | ASTM D648 |
| HDT, 1.82 MPa, 3.2mm, unannealed | 96 | °C | ASTM D648 |
| HDT, 0.45 MPa, 6.4 mm, unannealed | 105 | °C | ASTM D648 |
| HDT, 1.82 MPa, 6.4 mm, unannealed | 99 | °C | ASTM D648 |
Your PDF is downloading. Please wait.
