NORYL™ Resin NH8024LHR

NORYL NH8024LHR resin is a 20% glass reinforced modified polyphenylene ether (PPE). This injection moldable grade contains non-brominated, non-chlorinated flame retardant, low heat release

Product Family

NORYL™ RESINS

Polymer Family

Polyphenylene ether (PPE)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Amorphous
Dimensional stability
Hydrolytic Stability
Low heat release
Low Moisture Absorption
Low Shrinkage
Low Specific Gravity
Low Warpage
No PFAS intentionally added

Industry

Material previously used in

Electrical
Electronic Components
Energy Management

Applications

Possible usage of material

Electronics

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod impact, notched
– 80104 +23°C, 2.75 J	7	kJ/m²	ISO 180/1A
– 80104 -30°C, 2.75 J	7	kJ/m²	ISO 180/1A
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	7	kJ/m²	ISO 179/1eA
*Charpy 23°C, Unnotch Edgew 80104 sp=62mm*	35	kJ/m²	ISO 179/1eU
Izod Impact, notched, 23°C	71	J/m	ASTM D256
Izod Impact, unnotched, 23°C	441	J/m	ASTM D4812

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	80 - 100	°C
Drying Time	2 - 4	Hrs
Drying Time (Cumulative)	8	Hrs
Melt Temperature	280 - 310	°C
Rear - Zone 1 Temperature	260 - 280	°C
Middle - Zone 2 Temperature	270 - 300	°C
Front - Zone 3 Temperature	280 - 310	°C
Nozzle Temperature	280 - 305	°C
Mold Temperature	90 - 110	°C
Back Pressure	0.5 - 1.0	MPa
Screw Speed	40 - 60	rpm

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, break, 5 mm/min	103	MPa	ISO 527
Tensile Strain, break, 5 mm/min	2.3	%	ISO 527
Tensile Modulus
– 5 mm/min	6040	MPa	ISO 527
Flexural Modulus, 2 mm/min	6260	MPa	ISO 178
Flexural Stress, break, 2 mm/min	155	MPa	ISO 178
Tensile Modulus, 5 mm/min	6320	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	2	%	ASTM D638
Tensile Stress, brk, Type I, 5 mm/min	110	MPa	ASTM D638
Flexural Modulus, 1.3 mm/min, 50 mm span	6370	MPa	ASTM D790
Flexural Stress, brk, 1.3 mm/min, 50 mm span	160	MPa	ASTM D790

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	1.27	-	ASTM D792
Moisture Absorption, (23°C/50% RH/24 hrs)	0.04	%	ASTM D570
Water Absorption, (23°C/24hrs)	0.1	%	ASTM D570
Mold Shrinkage, flow, 24 hrs	0 - 0.2	%	ASTM D955
Mold Shrinkage, xflow, 24 hrs	0 - 0.4	%	ASTM D955
Melt Flow Rate, 280°C/5.0 kgf	4	g/10 min	ASTM D1238
Melt Flow Rate, 300°C/5.0 kgf	11	g/10 min	ASTM D1238

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	148	°C	ISO 75/Af
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	156	°C	ISO 75/Bf
HDT, 1.82 MPa, 3.2mm, unannealed	148	°C	ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed	155	°C	ASTM D648
Vicat Softening Temp, Rate B/50	157	°C	ISO 306
Vicat Softening Temp, Rate A/50	157	°C	ASTM D1525
CTE
– -40°C to 80°C, flow	3.E-05	1/°C	ISO 11359-2
– -40°C to 80°C, xflow	6.E-05	1/°C	ISO 11359-2
– -40°C to 80°C, flow	3.E-05	1/°C	ASTM E831
– -40°C to 80°C, xflow	6.E-05	1/°C	ASTM E831

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES