ELECTRICAL
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | 6.60E+16 | Ω | ASTM D257 |
Volume Resistivity | 4.64E+16 | Ω.cm | ASTM D257 |
NORYL NHP8010T3 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) designed for high heat resistance and ultra-thin-wall FR. This extrusion and injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries UL94 flame rating of V0 at 0.3mm. NORYL NHP8010T3 is based on a unique co-polymer technology and exhibits high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and low specific gravity. This grade is targeted for electrical vehicle (EV) battery pack insulation sheet/film, bus bar insulation layer and other high voltage electric component. See NHP8000VT3 resin for V0 at 0.25mm and CTI 600V/PLC 0 version.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | 6.60E+16 | Ω | ASTM D257 |
Volume Resistivity | 4.64E+16 | Ω.cm | ASTM D257 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | ≥0.3 | mm | UL 94 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched, 23°C | 326 | J/m | ASTM D256 |
Izod Impact, notched, -40°C | 103 | J/m | ASTM D256 |
Izod Impact, unnotched, 23°C | 2190 | J/m | ASTM D4812 |
Izod Impact, unnotched, -40°C | 1750 | J/m | ASTM D4812 |
Izod Impact, notched 80*10*4 +23°C | 25 | kJ/m² | ISO 180/1A |
Izod Impact, notched 80*10*4 -40°C | 11 | kJ/m² | ISO 180/1A |
Izod Impact, unnotched 80*10*4 +23°C | NB | kJ/m² | ISO 180/1U |
Izod Impact, unnotched 80*10*4 -40°C | NB | kJ/m² | ISO 180/1U |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 100 - 120 | °C | |
Drying Time | 3 - 5 | Hrs | |
Melt Temperature | 280 - 320 | °C | |
Nozzle Temperature | 250 - 320 | °C | |
Front - Zone 3 Temperature | 280 - 320 | °C | |
Middle - Zone 2 Temperature | 280 - 320 | °C | |
Rear - Zone 1 Temperature | 280 - 320 | °C | |
Mold Temperature | 70 - 120 | °C | |
Back Pressure | 0.3 - 0.8 | MPa | |
Screw Speed | 20 - 100 | rpm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yld, Type I, 5 mm/min | 62 | MPa | ASTM D638 |
Tensile Stress, brk, Type I, 5 mm/min | 49 | MPa | ASTM D638 |
Tensile Strain, yld, Type I, 5 mm/min | 4.2 | % | ASTM D638 |
Tensile Strain, brk, Type I, 5 mm/min | 10.6 | % | ASTM D638 |
Tensile Modulus, 5 mm/min | 2382 | MPa | ASTM D638 |
Flexural Stress at 5% strain, 1.3 mm/min, 50 mm span | 102 | MPa | ASTM D790 |
Flexural Stress, yld, 1.3 mm/min, 50 mm span | 106 | MPa | ASTM D790 |
Flexural Stress, brk, 1.3 mm/min, 50 mm span | 104 | MPa | ASTM D790 |
Flexural Modulus, 1.3 mm/min, 50 mm span | 2470 | MPa | ASTM D790 |
Tensile Stress, yield, 5 mm/min | 63 | MPa | ISO 527 |
Tensile Stress, break, 5 mm/min | 50 | MPa | ISO 527 |
Tensile Strain, yield, 5 mm/min | 4.2 | % | ISO 527 |
Tensile Strain, break, 5 mm/min | 35.6 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 2436 | MPa | ISO 527 |
Flexural Strength, 2 mm/min | 106 | MPa | ISO 178 |
Flexural Modulus, 2 mm/min | 2452 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Density | 1.09 | g/cm³ | ISO 1183 |
Moisture Absorption, (23°C/50% RH/24hrs) | 0.04 | % | ISO 62-4 |
Melt Flow Rate, 300°C/5.0 kgf | 15.7 | g/10 min | ASTM D1238 |
Mold Shrinkage, flow | 0.77 | % | SABIC method |
Mold Shrinkage, xflow | 0.76 | % | SABIC method |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 0.45 MPa, 3.2 mm, unannealed | 149 | °C | ASTM D648 |
HDT, 1.82 MPa, 3.2mm, unannealed | 132 | °C | ASTM D648 |
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 149 | °C | ISO 75/Bf |
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 134 | °C | ISO 75/Af |
Vicat Softening Temp, Rate A/50 | 163 | °C | ASTM D1525 |
Vicat Softening Temp, Rate A/120 | 165 | °C | ASTM D1525 |
Your PDF is downloading. Please wait.