NORYL NP6020 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) designed for high heat resistance and thin-wall FR performance. This injection moldable grade, non-chlorinated, non-brominated flame-retardant grade has a UL-94 V0 rating at 1.5 mm ( all colors) and certified per UL746G - an outline of investigation for non-Fluorine and non-PFAS containing materials. NORYL NP6020 resin passes VDE/DIN 475 part 815 testing, Ball Pressure Test (BPT) at 125C, GWFI 960C at 1, 2, 3mm, GWIT 825C at 1mm, and CTI >600V making this an excellent candidate for unattended appliance components where EN/IEC 60335 applies.
You can get in touch with us in these regions to buy the material
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Volume Resistivity | 2.5E+16 - 4.2E+16 | Ω.cm | IEC 60093 |
| Dielectric Strength, in oil, 1.6 mm | 27 | kV/mm | IEC 60243-1 |
| Dissipation Factor, 1 MHz | 0.0029 | - | IEC 60250 |
| Comparative Tracking Index | 600 | V | IEC 60112 |
| Relative Permittivity, 50/60 Hz | 2.7 | - | IEC 60250 |
| High Amp Arc Ignition (HAI), PLC 2 | ≥1 | mm | UL 746A |
| High Amp Arc Ignition (HAI), PLC 3 | ≥0.75 | mm | UL 746A |
| Hot-Wire Ignition (HWI), PLC 1 | ≥1.5 | mm | UL 746A |
| Hot-Wire Ignition (HWI), PLC 2 | ≥0.75 | mm | UL 746A |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| UL 746G certificate | View | - | |
| UL Yellow Card Link | View | - | - |
| UL Yellow Card Link 2 | View | - | - |
| UL Recognized, 94-5VA Flame Class Rating | ≥2.5 | mm | UL 94 |
| UL Recognized, 94V-0 Flame Class Rating | ≥0.75 | mm | UL 94 |
| Glow Wire Flammability Index, 1.0 mm | 960 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index, 2.0 mm | 960 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index, 3.0 mm | 960 | °C | IEC 60695-2-12 |
| Glow Wire Ignitability Temperature, 1.0 mm | 825 | °C | IEC 60695-2-13 |
| Glow Wire Ignitability Temperature, 2.0 mm | 800 | °C | IEC 60695-2-13 |
| Glow Wire Ignitability Temperature, 3.0 mm | 800 | °C | IEC 60695-2-13 |
| UV-light, water exposure/immersion | F1 | - | UL 746C |
| Oxygen Index (LOI) | 37 | % | ISO 4589 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Izod Impact, notched, 23°C | 49 | J/m | ASTM D256 |
| Izod Impact, notched, -30°C | 36 | J/m | ASTM D256 |
| Instrumented Dart Impact Total Energy, 23°C | 18 | J | ASTM D3763 |
| Izod Impact, notched 80*10*4 +23°C | 8 | kJ/m² | ISO 180/1A |
| Izod Impact, notched 80*10*4 -30°C | 5 | kJ/m² | ISO 180/1A |
| Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 9 | kJ/m² | ISO 179/1eA |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 110 - 120 | °C | |
| Drying Time | 2 - 3 | Hrs | |
| Melt Temperature | 300 - 320 | °C | |
| Nozzle Temperature | 280 - 300 | °C | |
| Front - Zone 3 Temperature | 300 - 320 | °C | |
| Middle - Zone 2 Temperature | 280 - 300 | °C | |
| Rear - Zone 1 Temperature | 260 - 280 | °C | |
| Hopper Temperature | 80 - 100 | °C | |
| Mold Temperature | 100 - 133 | °C |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, yld, Type I, 50 mm/min | 78 | MPa | ASTM D638 |
| Tensile Stress, brk, Type I, 50 mm/min | 67 | MPa | ASTM D638 |
| Tensile Strain, yld, Type I, 50 mm/min | 4.6 | % | ASTM D638 |
| Tensile Strain, brk, Type I, 50 mm/min | 6.1 | % | ASTM D638 |
| Tensile Modulus, 5 mm/min | 2740 | MPa | ASTM D638 |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 121 | MPa | ASTM D790 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 3020 | MPa | ASTM D790 |
| Tensile Stress, yield, 50 mm/min | 77 | MPa | ISO 527 |
| Tensile Stress, break, 50 mm/min | 56 | MPa | ISO 527 |
| Tensile Strain, yield, 50 mm/min | 4.6 | % | ISO 527 |
| Tensile Strain, break, 50 mm/min | 4.7 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 2740 | MPa | ISO 527 |
| Flexural Stress, yield, 2 mm/min | 114 | MPa | ISO 178 |
| Flexural Modulus, 2 mm/min | 2680 | MPa | ISO 178 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Specific Gravity | 1.14 | - | ASTM D792 |
| Mold Shrinkage, flow, 3.2 mm | 0.5 - 0.7 | % | SABIC method |
| Melt Flow Rate, 280°C/5.0 kgf | 13.5 | g/10 min | ASTM D1238 |
| Density | 1.14 | g/cm³ | ISO 1183 |
| Water Absorption, (23°C/saturated) | 0.18 | % | ISO 62-1 |
| Moisture Absorption (23°C / 50% RH) | 0.06 | % | ISO 62 |
| Melt Volume Rate, MVR at 280°C/5.0 kg | 11 | cm³/10 min | ISO 1133 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Vicat Softening Temp, Rate B/50 | 150 | °C | ASTM D1525 |
| HDT, 1.82 MPa, 3.2mm, unannealed | 125 | °C | ASTM D648 |
| CTE, -40°C to 40°C, flow | 7.75E-05 | 1/°C | ASTM E831 |
| CTE, -40°C to 40°C, xflow | 7.E-05 | 1/°C | ASTM E831 |
| CTE, -40°C to 40°C, flow | 7.5E-05 | 1/°C | ISO 11359-2 |
| CTE, -40°C to 40°C, xflow | 7.75E-05 | 1/°C | ISO 11359-2 |
| Ball Pressure Test, 125°C +/- 2°C | 125 | - | IEC 60695-10-2 |
| Vicat Softening Temp, Rate B/50 | 141 | °C | ISO 306 |
| Vicat Softening Temp, Rate B/120 | 151 | °C | ISO 306 |
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 124 | °C | ISO 75/Af |
| Relative Temp Index, Elec | 110 | °C | UL 746B |
| Relative Temp Index, Mech w/impact | 105 | °C | UL 746B |
| Relative Temp Index, Mech w/o impact | 110 | °C | UL 746B |
Your PDF is downloading. Please wait.
