NORYL™ Resin NPP6034T3

NORYL NPP6034T3 resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V0 at 0.3mm for thin-wall molding capability along with UL746G - an outline of investigation for non-Fluoring and non-PFAS containing materials. NORYL NPP6034T3 is based on a unique co-polymer technology and exhibits good dimensional stability, high heat resistance, strong electrical performance and very low specific gravity. Target application is Electric Vehicle (EV) battery internal parts and electric components.

Product Family

NORYL™ RESINS

Polymer Family

Polyphenylene Ether + PS (PPE+PS)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Amorphous
Dimensional stability
Good Processability
High stiffness/Strength
High temperature resistance
Hydrolytic Stability
Low Moisture Absorption
Low Shrinkage
Low Specific Gravity
Low Warpage
No PFAS intentionally added
Non Cl/Br flame retardant
UL 746G certified

Industry

Material previously used in

Electronic Components
Energy Storage

Applications

Possible usage of material

Electronic Components
EV/HEV Battery

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Surface Resistivity	9.7E+16	Ω	ASTM D257
Volume Resistivity	1.49E+16	Ω.cm	ASTM D257

FLAME CHARACTERISTICS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
UL 746G certificate	View	-
UL Yellow Card Link	View	-	-
UL Recognized, 94V-0 Flame Class Rating	≥0.3	mm	UL 94
UL Recognized, 94-5VA Flame Class Rating	≥2.0	mm	UL 94

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	143	J/m	ASTM D256
Izod Impact, notched, -30°C	91	J/m	ASTM D256
Izod Impact, unnotched, 23°C	548	J/m	ASTM D4812
Izod Impact, unnotched, -30°C	614	J/m	ASTM D4812
*Izod Impact, notched 80104 +23°C*	12	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 -30°C*	9.6	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	548	kJ/m²	ISO 180/1U
*Izod Impact, unnotched 80104 -30°C*	614	kJ/m²	ISO 180/1U

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	100 - 120	°C
Drying Time	3 - 5	Hrs
Melt Temperature	280 - 330	°C
Nozzle Temperature	250 - 330	°C
Front - Zone 3 Temperature	280 - 330	°C
Middle - Zone 2 Temperature	280 - 330	°C
Rear - Zone 1 Temperature	280 - 330	°C
Mold Temperature	70 - 140	°C
Screw Speed	60 - 100	rpm

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, brk, Type I, 5 mm/min	115	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	2.5	%	ASTM D638
Tensile Modulus, 5 mm/min	6911	MPa	ASTM D638
Flexural Strength, 1.3 mm/min, 50 mm span	163	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	6160	MPa	ASTM D790
Tensile Stress, break, 5 mm/min	116	MPa	ISO 527
Tensile Strain, break, 5 mm/min	2.4	%	ISO 527
Tensile Modulus, 1 mm/min	7274	MPa	ISO 527
Flexural Strength, 2 mm/min	161	MPa	ISO 178
Flexural Modulus, 2 mm/min	5886	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.26	g/cm³	ISO 1183
Melt Flow Rate, 280°C/5.0 kgf	11	g/10 min	ASTM D1238
Melt Flow Rate, 300°C/5.0 kgf	22	g/10 min	ASTM D1238
Melt Volume Rate, MVR at 280°C/5.0 kg	9.4	cm³/10 min	ISO 1133
Melt Volume Rate, MVR at 300°C/5.0 kg	20	cm³/10 min	ISO 1133
Moisture Absorption, (23°C/50% RH/24hrs)	0.03	%	ISO 62-4
Mold Shrinkage, flow	0.33	%	SABIC method
Mold Shrinkage, xflow	0.60	%	SABIC method

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 0.45 MPa, 3.2 mm, unannealed	138	°C	ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed	131	°C	ASTM D648
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	139	°C	ISO 75/Bf
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	132	°C	ISO 75/Af
CTE, -40°C to 40°C, flow	2.7E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	7.3E-05	1/°C	ASTM E831
Vicat Softening Temp, Rate A/50	150	°C	ISO 306
Vicat Softening Temp, Rate B/50	139	°C	ISO 306
Relative Temp Index, Elec	65	°C	UL 746B
Relative Temp Index, Mech w/impact	65	°C	UL 746B
Relative Temp Index, Mech w/o impact	65	°C	UL 746B

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES