NORYL™ Resin V0150IR2

NORYL V0150IR2 resin is an unreinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V0 at 1.0mm, 5VA at 2.0mm along with a UL746C Outdoor Suitability rating of F1. NORYL V0150IR2 resin exhibits high impact strength, good dimensional stability, high heat resistance, strong electrical performance, very low specific gravity and capable for laser welding process. The target applications are Solar / Photovoltaic (PV) junction boxes and other electrical enclosure with laser welding process.

Product Family

NORYL™ RESINS

Polymer Family

Polyphenylene Ether + PS (PPE+PS)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Amorphous
Dimensional stability
High temperature resistance
Hydrolytic Stability
Low Moisture Absorption
Low Shrinkage
Low Warpage
Non Cl/Br flame retardant

Industry

Material previously used in

Energy Management
Energy Storage

Applications

Possible usage of material

Electronic Components
Enclosures
Infrastructure

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Volume Resistivity	2.1E+16	Ω.cm	ASTM D257
Surface Resistivity	1.1E+17	Ω	ASTM D257
Comparative Tracking Index (UL) {PLC}	2	PLC Code	UL 746A

FLAME CHARACTERISTICS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
UL Yellow Card Link	View	-	-
UL Recognized, 94V-0 Flame Class Rating	≥1.0	mm	UL 94
UL Recognized, 94-5VA Flame Class Rating	≥2.0	mm	UL 94
UV-light, water exposure/immersion	f1	-	UL 746C
Glow Wire Flammability Index, 3.0 mm	960	°C	IEC 60695-2-12
Glow Wire Ignitability Temperature, 3.0 mm	825	°C	IEC 60695-2-13

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	117	J/m	ASTM D256
Izod Impact, notched, -30°C	61	J/m	ASTM D256
Izod Impact, unnotched, 23°C	2130	J/m	ASTM D4812
Izod Impact, unnotched, -30°C	1920	J/m	ASTM D4812
*Izod Impact, notched 80104 +23°C*	7.9	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 -30°C*	6.2	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	120	kJ/m²	ISO 180/1U
*Izod Impact, unnotched 80104 -30°C*	107	kJ/m²	ISO 180/1U
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	8.8	kJ/m²	ISO 179/1eA
*Charpy -30°C, V-notch Edgew 80104 sp=62mm*	5.3	kJ/m²	ISO 179/1eA
*Charpy 23°C, Unnotch Edgew 80104 sp=62mm*	94	kJ/m²	ISO 179/1eU
*Charpy -30°C, Unnotch Edgew 80104 sp=62mm*	94	kJ/m²	ISO 179/1eU

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	100 - 120	°C
Drying Time	3 - 5	Hrs
Melt Temperature	280 - 330	°C
Nozzle Temperature	250 - 330	°C
Front - Zone 3 Temperature	280 - 330	°C
Middle - Zone 2 Temperature	280 - 330	°C
Rear - Zone 1 Temperature	280 - 330	°C
Hopper Temperature	70 - 140	°C
Mold Temperature	30 - 100	°C

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, yld, Type I, 5 mm/min	72	MPa	ASTM D638
Tensile Stress, brk, Type I, 5 mm/min	53	MPa	ASTM D638
Tensile Strain, yld, Type I, 5 mm/min	4.7	%	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	16.1	%	ASTM D638
Tensile Modulus, 5 mm/min	2540	MPa	ASTM D638
Flexural Strength, 1.3 mm/min, 50 mm span	116	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	2630	MPa	ASTM D790
Tensile Stress, yield, 5 mm/min	72	MPa	ISO 527
Tensile Stress, break, 5 mm/min	52	MPa	ISO 527
Tensile Strain, yield, 5 mm/min	4.8	%	ISO 527
Tensile Strain, break, 5 mm/min	13.9	%	ISO 527
Tensile Modulus, 1 mm/min	2558	MPa	ISO 527
Flexural Strength, 2 mm/min	112	MPa	ISO 178
Flexural Modulus, 2 mm/min	2535	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	1.1	-	ASTM D792
Density	1.1	g/cm³	ISO 1183
Melt Flow Rate, 300°C/5.0 kgf	13.8	g/10 min	ASTM D1238
Melt Volume Rate, MVR at 300°C/5.0 kg	11.4	cm³/10 min	ISO 1133
Moisture Absorption (23°C / 50% RH)	0.007	%	ISO 62
Water Absorption, 23°C/24hrs	0.23	%	SABIC method
Mold Shrinkage, flow, 3.2 mm	1.04	%	SABIC method
Mold Shrinkage, xflow, 3.2 mm	1.09	%	SABIC method

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 0.45 MPa, 3.2 mm, unannealed	146	°C	ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed	127	°C	ASTM D648
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	148	°C	ISO 75/Bf
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	130	°C	ISO 75/Af
Vicat Softening Temp, Rate A/50	162	°C	ASTM D1525
Vicat Softening Temp, Rate B/50	151	°C	ASTM D1525
Vicat Softening Temp, Rate A/50	163	°C	ISO 306
Vicat Softening Temp, Rate B/50	151	°C	ISO 306
CTE, -40°C to 40°C, flow	7.2E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	7.8E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, flow	7.0E-05	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	7.8E-05	1/°C	ISO 11359-2
Relative Temp Index, Elec	110	°C	UL 746B
Relative Temp Index, Mech w/impact	105	°C	UL 746B
Relative Temp Index, Mech w/o impact	115	°C	UL 746B

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES