NORYL™ Resin WM300G

NORYL WM300G resin is a non-reinforced impact modified blend of Polyphenylene ether (PPE) + polystyrene (PS). NORYL WM300G resin exhibits good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability. Due to the use of special impact modification NORYL WM300G resin has improved processing stability preventing potential creation of restricted substances upon processing. NORYL WM300G resin is an excellent candidate for a variety of water management applications such as valves, filtration components, and water meter internals. NORYL WM300G resin can be used for injection molding as well as extrusion (e.g. pipe, profile). NORYL WM300G resin is food contact compliant and global drink water certification is pending.

Product Family

NORYL™ RESINS

Polymer Family

Polyphenylene Ether + PS (PPE+PS)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Amorphous
Dimensional stability
Food contact
High stiffness/Strength
Hydrolytic Stability
Low Corrosivity
Low Moisture Absorption
Low Shrinkage
Low Specific Gravity
Low Warpage
No PFAS intentionally added
Potable water safe

Industry

Material previously used in

Personal and Professional Hygiene
Water Management

Applications

Possible usage of material

Meter Water

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*Izod Impact, notched 80104 +23°C*	18	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 0°C*	12	kJ/m²	ISO 180/1A
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	20	kJ/m²	ISO 179/1eA
*Charpy 0°C, V-notch Edgew 80104 sp=62mm*	14	kJ/m²	ISO 179/1eA

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	100 - 120	°C
Drying Time	2 - 3	Hrs
Melt Temperature	280 - 330	°C
Rear - Zone 1 Temperature	240 - 290	°C
Middle - Zone 2 Temperature	260 - 310	°C
Front - Zone 3 Temperature	280 - 330	°C
Nozzle Temperature	260 - 330	°C
Mold Temperature	80 - 120	°C
Hopper Temperature	60 - 80	°C

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Modulus, 1 mm/min	2500	MPa	ISO 527
Tensile Stress, yield, 50 mm/min	65	MPa	ISO 527
Tensile Stress, break, 50 mm/min	52	MPa	ISO 527
Tensile Strain, yield, 50 mm/min	4.5	%	ISO 527
Flexural Strength, 2 mm/min	100	MPa	ISO 178
Flexural Modulus, 2 mm/min	2500	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.06	g/cm³	ISO 1183
Melt Volume Rate, MVR at 300°C/5.0 kg	15	cm³/10 min	ISO 1133
Mold Shrinkage, flow	0.8 - 1	%	SABIC method
Mold Shrinkage, xflow	0.8 - 1	%	SABIC method
Moisture Absorption (23°C / 50% RH)	0.06	%	ISO 62
Water Absorption, (23°C/saturated)	0.23	%	ISO 62-1

PROFILE EXTRUSION

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	100 - 120	°C
Drying Time	2 - 3	Hrs
Melt Temperature	220 - 285	°C
Barrel - Zone 1 Temperature	220 - 285	°C
Barrel - Zone 2 Temperature	220 - 285	°C
Barrel - Zone 3 Temperature	220 - 285	°C
Barrel - Zone 4 Temperature	220 - 285	°C
Hopper Temperature	60 - 80	°C
Adapter Temperature	220 - 285	°C
Die Temperature	220 - 285	°C
Calibrator Temperature	30 - 60	°C
Water Bath Temperature	30 - 50	°C

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	147	°C	ISO 75/Bf
Vicat Softening Temp, Rate B/120	155	°C	ISO 306

CAE Cards

Please login to view graphs, download multi-point data or literature

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES