NORYL™ SA110A resin is a low molecular weight polymer based on polyphenylene ether (PPE). Miscibility of NORYL SA110A resin in polystyrene may allow use as a styrene endblock reinforcing resin in a variety of materials like styrene-based rubbers and styrene block copolymers.
Adding NORYL SA110A resin to these systems may improve heat resistance (adhesion at elevated temperatures) while maintaining peel strength. The viscosity profile of NORYL SA110A resin makes it a good potential candidate for melt extrusion tape processes.
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Physical Form | PELLET | - | SABIC method |
| Mw | 6300 | - | SABIC method |
| Mn | 2350 | - | SABIC method |
| Mz | 8900 | - | SABIC method |
| Gardner Color | |||
| – 10% in toluene | 9 | - | ASTM D6166 |
| Melt Viscosity | |||
| – at 220°C | 6200 | Poise | SABIC method |
| – at 240°C | 6200 | Poise | SABIC method |
| – at 260°C | 6200 | Poise | SABIC method |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tg (half width) | 165 | °C | SABIC method |
Your PDF is downloading. Please wait.
