ULTEM 2220 resin is a high flow 20% glass fiber reinforced polyetherimide resin. The material is RoHS compliant and is intrinsically flame retardant
without the use of FR modifiers and offers UL94 V0 at ≥ 0.5 mm. The material may offer excellent dimension stability,
strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217 °C. The material is opaque and can be
custom colored.
ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Hot-Wire Ignition (HWI), PLC 2 | ≥0.5 | mm | UL 746A |
| Hot-Wire Ignition (HWI), PLC 1 | ≥1.5 | mm | UL 746A |
| High Amp Arc Ignition (HAI), PLC 0 | 0.5 | mm | UL 746A |
| High Voltage Arc Track Rate {PLC} | 3 | PLC Code | UL 746A |
| Volume Resistivity | 1E+13 | Ω.cm | ASTM D257 |
| Dielectric Strength, in oil, 1.6 mm | 27 | kV/mm | ASTM D149 |
| Dielectric Strength, in air, 1.6 mm | 27 | kV/mm | ASTM D149 |
| Comparative Tracking Index (UL) {PLC} | 4 | PLC Code | UL 746A |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| UL Recognized, 94V-0 Flame Class Rating | 0.5 | mm | UL 94 |
| Glow Wire Ignitability Temperature, 3.0 mm | 825 | °C | IEC 60695-2-13 |
| Glow Wire Ignitability Temperature, 1.5 mm | 825 | °C | IEC 60695-2-13 |
| Glow Wire Ignitability Temperature, 0.5 mm | 825 | °C | IEC 60695-2-13 |
| Glow Wire Flammability Index, 3.0 mm | 960 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index, 1.5 mm | 960 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index, 0.5 mm | 960 | °C | IEC 60695-2-12 |
| UL Yellow Card Link | View | - | - |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Izod Impact, notched 80*10*4 +23°C | 6 | kJ/m² | ISO 180/1A |
| Izod Impact, notched 80*10*4 -30°C | 6 | kJ/m² | ISO 180/1A |
| Izod Impact, unnotched 80*10*4 +23°C | 34 | kJ/m² | ISO 180/1U |
| Izod Impact, unnotched 80*10*4 -30°C | 34 | kJ/m² | ISO 180/1U |
| Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm | 4 | kJ/m² | ISO 179/1eA |
| Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm | 4 | kJ/m² | ISO 179/1eA |
| Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm | 39 | kJ/m² | ISO 179/1eU |
| Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm | 39 | kJ/m² | ISO 179/1eU |
| Izod Impact, notched, 23°C | 60 | J/m | ASTM D256 |
| Izod Impact, notched, -30°C | 55 | J/m | ASTM D256 |
| Izod Impact, unnotched, 23°C | 580 | J/m | ASTM D4812 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 150 | °C | |
| Drying Time | 4 - 6 | Hrs | |
| Drying Time (Cumulative) | 24 | Hrs | |
| Maximum Moisture Content | 0.02 | % | |
| Melt Temperature | 350 - 400 | °C | |
| Nozzle Temperature | 345 - 400 | °C | |
| Front - Zone 3 Temperature | 345 - 400 | °C | |
| Middle - Zone 2 Temperature | 340 - 400 | °C | |
| Rear - Zone 1 Temperature | 330 - 400 | °C | |
| Mold Temperature | 135 - 165 | °C | |
| Back Pressure | 0.3 - 0.7 | MPa | |
| Screw Speed | 40 - 70 | rpm | |
| Shot to Cylinder Size | 40 - 60 | % | |
| Vent Depth | 0.025 - 0.076 | mm |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, yield, 5 mm/min | 150 | MPa | ISO 527 |
| Tensile Stress, break, 5 mm/min | 148 | MPa | ISO 527 |
| Tensile Strain, yield, 5 mm/min | 3.7 | % | ISO 527 |
| Tensile Strain, break, 5 mm/min | 3.9 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 6800 | MPa | ISO 527 |
| Flexural Modulus, 2 mm/min | 7000 | MPa | ISO 178 |
| Flexural Stress, break, 2 mm/min | 240 | MPa | ISO 178 |
| Tensile Modulus, 5 mm/min | 7700 | MPa | ASTM D638 |
| Tensile Strain, brk, Type I, 5 mm/min | 3.3 | % | ASTM D638 |
| Tensile Stress, brk, Type I, 5 mm/min | 160 | MPa | ASTM D638 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 7600 | MPa | ASTM D790 |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 250 | MPa | ASTM D790 |
| Flexural Stress, brk, 1.3 mm/min, 50 mm span | 250 | MPa | ASTM D790 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Density | 1.4 | g/cm³ | ISO 1183 |
| Mold Shrinkage, flow | 0.3 - 0.5 | % | SABIC method |
| Mold Shrinkage, xflow | 0.3 - 0.5 | % | SABIC method |
| Melt Volume Rate, MVR at 337°C/6.7 kg | 8 | cm³/10 min | ISO 1133 |
| Specific Gravity | 1.4 | - | ASTM D792 |
| Melt Flow Rate, 337°C/6.7 kgf | 14 | g/10 min | ASTM D1238 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 210 | °C | ISO 75/Af |
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 215 | °C | ISO 75/Bf |
| HDT, 1.82 MPa, 3.2mm, unannealed | 210 | °C | ASTM D648 |
| Vicat Softening Temp, Rate B/120 | 225 | °C | ISO 306 |
| Vicat Softening Temp, Rate B/50 | 220 | °C | ASTM D1525 |
| CTE, -40°C to 40°C, flow | 1.6E-05 | 1/°C | ASTM E831 |
| CTE, -40°C to 40°C, xflow | 5.34E-05 | 1/°C | ASTM E831 |
| Relative Temp Index, Elec | 170 | °C | UL 746B |
| Relative Temp Index, Mech w/impact | 170 | °C | UL 746B |
| Relative Temp Index, Mech w/o impact | 170 | °C | UL 746B |
view multipoint data represented visually on graphs.
You may click on the curve legends to select/unselect the curves.
Please login to view graphs, download multi-point data or literature
Please login to view graphs, download multi-point data or literature
Your PDF is downloading. Please wait.
