ELECTRICAL
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Comparative Tracking Index (UL) {PLC} | 4 | PLC Code | UL 746A |
Hot-Wire Ignition (HWI), PLC 0 | ≥0.75 | mm | UL 746A |
High Amp Arc Ignition (HAI), PLC 4 | ≥0.75 | mm | UL 746A |
High flow Polyetherimide blend. ECO Conforming, UL94 V0 Listing. US FDA Food Contact compliant.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Comparative Tracking Index (UL) {PLC} | 4 | PLC Code | UL 746A |
Hot-Wire Ignition (HWI), PLC 0 | ≥0.75 | mm | UL 746A |
High Amp Arc Ignition (HAI), PLC 4 | ≥0.75 | mm | UL 746A |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | 1.5 | mm | UL 94 |
UL Recognized, 94V-2 Flame Class Rating | ≥0.75 | mm | UL 94 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, unnotched, 23°C | 2082 | J/m | ASTM D4812 |
Izod Impact, notched, 23°C | 53 | J/m | ASTM D256 |
Izod Impact, Reverse Notched, 3.2 mm | 2670 | J/m | ASTM D256 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 135 | °C | |
Drying Time | 4 - 6 | Hrs | |
Drying Time (Cumulative) | 10 | Hrs | |
Maximum Moisture Content | 0.02 | % | |
Melt Temperature | 350 - 370 | °C | |
Nozzle Temperature | 350 - 370 | °C | |
Front - Zone 3 Temperature | 350 - 370 | °C | |
Middle - Zone 2 Temperature | 345 - 365 | °C | |
Rear - Zone 1 Temperature | 340 - 360 | °C | |
Mold Temperature | 135 - 165 | °C | |
Back Pressure | 0.3 - 0.7 | MPa | |
Screw Speed | 40 - 70 | rpm | |
Shot to Cylinder Size | 40 - 60 | % | |
Vent Depth | 0.025 - 0.076 | mm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yld, Type I, 5 mm/min | 96 | MPa | ASTM D638 |
Tensile Strain, brk, Type I, 5 mm/min | 70 | % | ASTM D638 |
Flexural Stress, yld, 2.6 mm/min, 100 mm span | 144 | MPa | ASTM D790 |
Flexural Modulus, 2.6 mm/min, 100 mm span | 3170 | MPa | ASTM D790 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Specific Gravity | 1.26 | - | ASTM D792 |
Mold Shrinkage, flow, 3.2 mm | 0.5 - 0.7 | % | SABIC method |
Melt Flow Rate, 337°C/6.6 kgf | 24 | g/10 min | ASTM D1238 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 1.82 MPa, 6.4 mm, unannealed | 190 | °C | ASTM D648 |
Relative Temp Index, Elec | 115 | °C | UL 746B |
Relative Temp Index, Mech w/impact | 115 | °C | UL 746B |
Relative Temp Index, Mech w/o impact | 115 | °C | UL 746B |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Comparative Tracking Index (UL) {PLC} | 4 | PLC Code | UL 746A |
Hot-Wire Ignition (HWI), PLC 0 | ≥0.75 | mm | UL 746A |
High Amp Arc Ignition (HAI), PLC 4 | ≥0.75 | mm | UL 746A |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | 1.5 | mm | UL 94 |
UL Recognized, 94V-2 Flame Class Rating | ≥0.75 | mm | UL 94 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, unnotched, 23°C | 2082 | J/m | ASTM D4812 |
Izod Impact, notched, 23°C | 53 | J/m | ASTM D256 |
Izod Impact, Reverse Notched, 3.2 mm | 2670 | J/m | ASTM D256 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 135 | °C | |
Drying Time | 4 - 6 | Hrs | |
Drying Time (Cumulative) | 10 | Hrs | |
Maximum Moisture Content | 0.02 | % | |
Melt Temperature | 350 - 370 | °C | |
Nozzle Temperature | 350 - 370 | °C | |
Front - Zone 3 Temperature | 350 - 370 | °C | |
Middle - Zone 2 Temperature | 345 - 365 | °C | |
Rear - Zone 1 Temperature | 340 - 360 | °C | |
Mold Temperature | 135 - 165 | °C | |
Back Pressure | 0.3 - 0.7 | MPa | |
Screw Speed | 40 - 70 | rpm | |
Shot to Cylinder Size | 40 - 60 | % | |
Vent Depth | 0.025 - 0.076 | mm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yld, Type I, 5 mm/min | 96 | MPa | ASTM D638 |
Tensile Strain, brk, Type I, 5 mm/min | 70 | % | ASTM D638 |
Flexural Stress, yld, 2.6 mm/min, 100 mm span | 144 | MPa | ASTM D790 |
Flexural Modulus, 2.6 mm/min, 100 mm span | 3170 | MPa | ASTM D790 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Specific Gravity | 1.26 | - | ASTM D792 |
Mold Shrinkage, flow, 3.2 mm | 0.5 - 0.7 | % | SABIC method |
Melt Flow Rate, 337°C/6.6 kgf | 24 | g/10 min | ASTM D1238 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 1.82 MPa, 6.4 mm, unannealed | 190 | °C | ASTM D648 |
Relative Temp Index, Elec | 115 | °C | UL 746B |
Relative Temp Index, Mech w/impact | 115 | °C | UL 746B |
Relative Temp Index, Mech w/o impact | 115 | °C | UL 746B |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Volume Resistivity | 1.E+15 | Ω.cm | IEC 60093 |
Surface Resistivity, ROA | >1.E+15 | Ω | IEC 60093 |
Dielectric Strength, in oil, 3.2 mm | 15 | kV/mm | IEC 60243-1 |
Relative Permittivity, 1 MHz | 2.9 | - | IEC 60250 |
Dissipation Factor, 50/60 Hz | 0.001 | - | IEC 60250 |
Dissipation Factor, 1 MHz | 0.005 | - | IEC 60250 |
Comparative Tracking Index | 150 | V | IEC 60112 |
Relative Permittivity, 50/60 Hz | 2.9 | - | IEC 60250 |
Comparative Tracking Index (UL) {PLC} | 4 | PLC Code | UL 746A |
Hot-Wire Ignition (HWI), PLC 0 | ≥0.75 | mm | UL 746A |
High Amp Arc Ignition (HAI), PLC 4 | ≥0.75 | mm | UL 746A |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | 1.5 | mm | UL 94 |
UL Recognized, 94V-2 Flame Class Rating | ≥0.75 | mm | UL 94 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched 80*10*4 +23°C | 5 | kJ/m² | ISO 180/1A |
Izod Impact, notched 80*10*4 -30°C | 5 | kJ/m² | ISO 180/1A |
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 4 | kJ/m² | ISO 179/1eA |
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm | 4 | kJ/m² | ISO 179/1eA |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 130 - 140 | °C | |
Drying Time | 3 - 4 | Hrs | |
Melt Temperature | 340 - 380 | °C | |
Nozzle Temperature | 340 - 360 | °C | |
Front - Zone 3 Temperature | 340 - 360 | °C | |
Middle - Zone 2 Temperature | 330 - 350 | °C | |
Rear - Zone 1 Temperature | 320 - 340 | °C | |
Hopper Temperature | 80 - 100 | °C | |
Mold Temperature | 125 - 140 | °C |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Taber Abrasion, CS-17, 1 kg | 20 | mg/1000cy | SABIC method |
Tensile Stress, yield, 50 mm/min | 95 | MPa | ISO 527 |
Tensile Stress, break, 50 mm/min | 75 | MPa | ISO 527 |
Tensile Strain, yield, 50 mm/min | 6.5 | % | ISO 527 |
Tensile Strain, break, 50 mm/min | 20 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 3000 | MPa | ISO 527 |
Flexural Stress, yield, 2 mm/min | 125 | MPa | ISO 178 |
Flexural Modulus, 2 mm/min | 3100 | MPa | ISO 178 |
Ball Indentation Hardness, H358/30 | 125 | MPa | ISO 2039-1 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Mold Shrinkage on Tensile Bar, flow | 0.5 - 0.7 | % | SABIC method |
Density | 1.27 | g/cm³ | ISO 1183 |
Water Absorption, (23°C/saturated) | 0.9 | % | ISO 62-1 |
Moisture Absorption (23°C / 50% RH) | 0.5 | % | ISO 62 |
Melt Volume Rate, MVR at 340°C/5.0 kg | 16 | cm³/10 min | ISO 1133 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Thermal Conductivity | 0.23 | W/m-°C | ISO 8302 |
CTE, 23°C to 150°C, flow | 6.E-05 | 1/°C | ISO 11359-2 |
CTE, 23°C to 150°C, xflow | 6.E-05 | 1/°C | ISO 11359-2 |
Ball Pressure Test, 125°C +/- 2°C | PASSES | - | IEC 60695-10-2 |
Vicat Softening Temp, Rate A/50 | 210 | °C | ISO 306 |
Vicat Softening Temp, Rate B/120 | 205 | °C | ISO 306 |
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm | 195 | °C | ISO 75/Be |
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm | 180 | °C | ISO 75/Ae |
Relative Temp Index, Elec | 115 | °C | UL 746B |
Relative Temp Index, Mech w/impact | 115 | °C | UL 746B |
Relative Temp Index, Mech w/o impact | 115 | °C | UL 746B |
Your PDF is downloading. Please wait.