LNP LUBRILOY DF204 compound is based on Polycarbonate (PC) resin containing 20% glass fiber and a proprietary lubricant. Added features of this grade include: Wear Resistant.
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Glow Wire Ignitability Temperature, 1.0 mm | 800 | °C | IEC 60695-2-13 |
| Glow Wire Ignitability Temperature, 1.5 mm | 800 | °C | IEC 60695-2-13 |
| Glow Wire Flammability Index, 1.0 mm | 775 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index, 1.5 mm | 800 | °C | IEC 60695-2-12 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Izod Impact, unnotched, 23°C | 758 | J/m | ASTM D4812 |
| Izod Impact, notched, 23°C | 181 | J/m | ASTM D256 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 4 | Hrs | |
| Maximum Moisture Content | 0.02 | % | |
| Melt Temperature | 290 - 315 | °C | |
| Front - Zone 3 Temperature | 280 - 310 | °C | |
| Middle - Zone 2 Temperature | 280 - 300 | °C | |
| Rear - Zone 1 Temperature | 275 - 300 | °C | |
| Mold Temperature | 65 - 95 | °C | |
| Back Pressure | 0.2 - 0.3 | MPa | |
| Screw Speed | 30 - 60 | rpm |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, break | 105 | MPa | ASTM D638 |
| Tensile Strain, break | 2.8 | % | ASTM D638 |
| Tensile Modulus, 50 mm/min | 6750 | MPa | ASTM D638 |
| Flexural Stress | 158 | MPa | ASTM D790 |
| Flexural Modulus | 5990 | MPa | ASTM D790 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Density | 1.32 | g/cm³ | ASTM D792 |
| Moisture Absorption, (23°C/50% RH/24 hrs) | 0.1 | % | ASTM D570 |
| Mold Shrinkage, flow, 24 hrs | 0.2 - 0.3 | % | ASTM D955 |
| Mold Shrinkage, xflow, 24 hrs | 0.2 - 0.3 | % | ASTM D955 |
| Wear Factor Washer | 179 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
| Dynamic COF | 0.41 | - | ASTM D3702 Modified: Manual |
| Static COF | 0.39 | - | ASTM D3702 Modified: Manual |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT, 0.45 MPa, 3.2 mm, unannealed | 142 | °C | ASTM D648 |
| HDT, 1.82 MPa, 3.2mm, unannealed | 137 | °C | ASTM D648 |
| CTE, -40°C to 40°C, flow | 6.84E-05 | 1/°C | ASTM E831 |
| CTE, -40°C to 40°C, xflow | 7.38E-05 | 1/°C | ASTM E831 |
| Thermal Conductivity | 0.25 | W/m-°C | ASTM E1530 |
Your PDF is downloading. Please wait.
