LNP THERMOCOMP EF004XXAR1 is a compound based on Polyetherimide (PEI) resin containing 20% glass fiber for Large Format Additive manufacturing (LFAM) applications. PEI compounds, based on SABIC's inherently flame-retardant ULTEM™ resins, provide low thermal expansion, high temperature performance, excellent strength-to-weight ratio, high modulus and low creep.
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Time | 4 - 6 | Hrs | |
| Drying Temperature | 120 - 150 | °C | |
| Extruder L/D | 24 | - | |
| Maximum Moisture Content | .02 | % | |
| Barrel - Zone 1 Temperature | 325 - 345 | °C | |
| Barrel - Zone 2 Temperature | 345 - 355 | °C | |
| Barrel - Zone 3 Temperature | 355 - 365 | °C | |
| Barrel - Zone 4 Temperature | 365 - 375 | °C | |
| Nozzle Temperature | 340 - 360 | °C | |
| Melt Temperature | 350 - 370 | °C | |
| Bed Temperature | 100 - 100 | °C | |
| Extruder Pressure | <17 | MPa |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, 5mm/min | |||
| – XZ Orientation | 94 | MPa | ASTM D638 Modified |
| – ZX Orientation | 39 | MPa | ASTM D638 Modified |
| Tensile Strain, 5mm/min | |||
| – XZ Orientation | 2.1 | % | ASTM D638 Modified |
| – ZX Orientation | 1.7 | % | ASTM D638 Modified |
| Tensile Stiffness, 5mm/min | |||
| – XZ Orientation | 5.6 | GPa | ASTM D638 Modified |
| – ZX Orientation | 2.8 | GPa | ASTM D638 Modified |
| Flexural Stress, 5mm/min | |||
| – XZ Orientation | 62 | MPa | ASTM D790 Modified |
| – ZX Orientation | 137 | MPa | ASTM D790 Modified |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Specific Gravity | 1.43 | - | ASTM D792 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT, 1.82 MPa, 3.2mm, annealed | 207 | °C | ASTM D648 |
Your PDF is downloading. Please wait.
