LNP THERMOCOMP ZC004XXAR1 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 20% carbon fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Higher Stiffness vs. glass fiber, Lower Thermal Expansion, Improved Hydrolytic Stability, Higher strength to Weight Ratio, Higher Temperature Performance and improved processing vs. ABS based grades.
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Extruder L/D | 24 | - | |
| Drying Temperature | 120 | °C | |
| Drying Time | 4 | Hrs | |
| Maximum Moisture Content | 0.02 | % | |
| Barrel - Zone 1 Temperature | 270 - 305 | °C | |
| Barrel - Zone 2 Temperature | 280 - 320 | °C | |
| Barrel - Zone 3 Temperature | 280 - 320 | °C | |
| Barrel - Zone 4 Temperature | 280 - 320 | °C | |
| Nozzle Temperature | 280 - 320 | °C | |
| Melt Temperature | 270 - 315 | °C | |
| Bed Temperature | 100 - 120 | °C | |
| Extruder Pressure | <13.5 | MPa |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, 5mm/min | |||
| – XZ Orientation | 75 | MPa | ASTM D638 Modified |
| – ZX Orientation | 75 | MPa | ASTM D638 Modified |
| Tensile Strain, 5mm/min | |||
| – XZ Orientation | 0.7 | % | ASTM D638 Modified |
| – ZX Orientation | 0.7 | % | ASTM D638 Modified |
| Tensile Stiffness, 5mm/min | |||
| – XZ Orientation | 12.2 | GPa | ASTM D638 Modified |
| – ZX Orientation | 12.2 | GPa | ASTM D638 Modified |
| Flexural Stress, 5mm/min | |||
| – XZ Orientation | 36 | MPa | ASTM D790 Modified |
| – ZX Orientation | 36 | MPa | ASTM D790 Modified |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Specific Gravity | 1.17 | - | ASTM D792 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT, 1.82 MPa, 3.2mm, annealed | 137 | °C | ASTM D648 |
Your PDF is downloading. Please wait.
