LNP THERMOCOMP DF002FVQ compound is based on Polycarbonate (PC) resin containing 10% glass fiber and available in black color only. Added features of this grade include: Improved Plating Surface and Mechanical Performance targeted for Laser Direct Structuring (LDS) applications, Good Adhesion Strength, UL94 V0@0.8mm (black).
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Dielectric Constant | |||
| – 1.1 GHz | 3.15 | - | SABIC method |
| – 1.9 GHz | 3.17 | - | SABIC method |
| – 5 GHz | 3.15 | - | SABIC method |
| – 10 GHz | 3.17 | - | SABIC method |
| – 20 GHz | 3.04 | - | SABIC method |
| Dissipation Factor | |||
| – 1.1 GHz | 0.01 | - | SABIC method |
| – 1.9 GHz | 0.01 | - | SABIC method |
| – 5 GHz | 0.01 | - | SABIC method |
| – 10 GHz | 0.01 | - | SABIC method |
| – 20 GHz | 0.01 | - | SABIC method |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| UL Yellow Card Link | View | - | - |
| UL Recognized, 94V-0 Flame Class Rating | 0.8 | mm | UL 94 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Izod Impact, notched, 23°C | 100 | J/m | ASTM D256 |
| Izod Impact, unnotched, 23°C | 600 | J/m | ASTM D4812 |
| Izod Impact, notched 80*10*4 +23°C | 9 | kJ/m² | ISO 180/1A |
| Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 10 | kJ/m² | ISO 179/1eA |
| Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm | 42 | kJ/m² | ISO 179/1eU |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 110 | °C | |
| Drying Time | 3 - 4 | Hrs | |
| Maximum Moisture Content | 0.02 | % | |
| Melt Temperature | 290 - 310 | °C | |
| Nozzle Temperature | 285 - 310 | °C | |
| Front - Zone 3 Temperature | 285 - 310 | °C | |
| Middle - Zone 2 Temperature | 285 - 310 | °C | |
| Rear - Zone 1 Temperature | 285 - 310 | °C | |
| Mold Temperature | 100 - 130 | °C | |
| Back Pressure | 0.1 - 0.3 | MPa | |
| Screw Speed | 50 - 150 | rpm |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, brk, Type I, 5 mm/min | 60 | MPa | ASTM D638 |
| Tensile Strain, brk, Type I, 5 mm/min | 3 | % | ASTM D638 |
| Tensile Modulus, 5 mm/min | 4610 | MPa | ASTM D638 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 4300 | MPa | ASTM D790 |
| Flexural Strength, 1.3 mm/min, 50 mm span | 115 | MPa | ASTM D790 |
| Tensile Stress, break, 5 mm/min | 60 | MPa | ISO 527 |
| Tensile Strain, break, 5 mm/min | 3.5 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 4625 | MPa | ISO 527 |
| Flexural Modulus, 2 mm/min | 4100 | MPa | ISO 178 |
| Flexural Strength, 2 mm/min | 110 | MPa | ISO 178 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Density | 1.35 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| – 300°C/1.2 kgf | 11 | g/10 min | ASTM D1238 |
| Mold Shrinkage, flow | 0.2 - 0.4 | % | SABIC method |
| Mold Shrinkage, xflow | 0.3 - 0.5 | % | SABIC method |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT, 0.45 MPa, 3.2 mm, unannealed | 126 | °C | ASTM D648 |
| HDT, 1.82 MPa, 3.2mm, unannealed | 120 | °C | ASTM D648 |
| CTE, -40°C to 40°C, flow | 3.5E-05 | 1/°C | ASTM E831 |
| CTE, -40°C to 40°C, xflow | 6.5E-05 | 1/°C | ASTM E831 |
| CTE, -40°C to 40°C, flow | 3.5E-05 | 1/°C | ISO 11359-2 |
| CTE, -40°C to 40°C, xflow | 6.7E-05 | 1/°C | ISO 11359-2 |
| Relative Temp Index, Elec | 80 | °C | UL 746B |
| Relative Temp Index, Mech w/impact | 80 | °C | UL 746B |
| Relative Temp Index, Mech w/o impact | 80 | °C | UL 746B |
Your PDF is downloading. Please wait.
